Back Panel Connections

1. AC Power, AC 120V 60 Hz 50W

2. Satellite Output To Analog Receiver

3. Satellite In (Connect LNB cable here)

4. HSI Data Output

5. Audio/Video Input

6. Audio Out (Right and left).

7. Video Out

8. CH3 CH4

9. TV Output

10. Antenna In

11. Polarizer Control (Skew In, +5V In, GND, CH/KV IN) ... connect the bottom row to analog IRD polarity connections using the cable that shipped with the receiver. CH/KV is rarely used and usually does not need to be connected.

12. Polarizer Control (Skew Out, +5V Out, GND, CH/KV Out) ... connect cable leads from the feedhorn here to the top row. CH/KV is rarely used and usually does not need to be connected.

13. Telco Back Panel Connections