| Line # |
Name |
Definition |
| Line A1 |
|
|
| |
Product String (initial) or Version Number |
String identifying the product or identifying
the version number. Press the following key combination to display the
version number: ARROW –, ARROW
–,
ARROW
¯,
ARROW
–.
Subsequently, ARROW
–and
ARROW
¯
will
toggle between the two strings. |
| |
Channel number |
Current Virtual Channel Number or channel
entry accumulator. |
| Line A2 |
|
|
| |
Unit Address |
The IRD's unit address. This will not update
dynamically. |
| |
TvPC Address |
The currently inserted TvPass Card's unit
address, or the string "Not in support mode," "Not mated," or "Not inserted,"
as appropriate. |
|
NYI
|
Unit Control Byte |
8 bits of interesting data. |
| Line A3 |
|
|
| |
Boot Sector Firmware Version |
Version number of the firmware in the boot
sector of ROM. |
| |
Minimum Firmware Version |
Version number of the firmware in the minimum
section of ROM. |
| |
Application Firmware Version |
Version number of the firmware in the application
section of ROM. |
| |
Current Firmware Version |
Current version number of firmware, including
downloads. |
| |
Target Firmware Version |
Firmware version number from last received
download preamble. |
| |
Download Status |
Current download process state, ID for idle,
AO for awaiting opportunity, or ER for error. |
| Line A4 |
|
|
| |
Product Configuration |
8 byte product configuration. This will not
update dynamically. |
| |
Time Zone |
2's complement number in the range +/- 780
that represents the number of minutes difference between the IRD's local
time and the time ad the prime meridian at Greenwich, England. |
| |
EMM Search State |
0 : idle; 1 : waiting for PID info; 2 : waiting
for EMM. |
| |
EMM Provider ID |
Provider of EMM stream. |
| |
Number of Channels |
Number of non-hidden channels in the current
VCT. |
| |
Current Epoch Number |
Epoch number of current program. |
| |
IPG Status |
0 : disabled; 1 : enabled. |
| Line A5 |
|
|
| |
ECM pid |
Entitlement Control Message Packet Identifier. |
| |
Daylight Savings Enable |
Daylight savings time enabled {Off, On}. |
| |
Daylight Savings Entry |
Daylight savings entry time in GPS. |
| |
Daylight Savings Exit |
Daylight savings exit time in GPS. |
| |
GPS Time |
Current GPS time. |
| |
Huffman Errors |
Current Huffman error count. |
| Line A6 |
|
|
| |
Control Channel Message counts |
allCount, singlecast & discard. |
| |
Packet Rate |
Total number of bits delivered on all 6 control
channels per second. Updates every 8 seconds. |
| |
VCT ID |
Current virtual channel table ID. |
|
NYI
|
Start Page of VCT Range |
start page of VCT range (for multimap). |
|
NYI
|
End Page of VCT Range |
end page of VCT range (for multimap). |
| |
ADPstat12 |
Contents of ADPstat12 register. |
| Line A7 |
|
|
| |
PID 0 |
Packet Identifier for control channel 0. |
| |
PID 1 (EMM) |
Packet Identifier for control channel 1. |
| |
PID 2 (SCC) |
Packet Identifier for control channel 2. |
| |
PID 3 (APP1) |
Packet Identifier for control channel 3. |
| |
PID 4 (APP2) |
Packet Identifier for control channel 4. |
| |
PID 5 (Network) |
Packet Identifier for control channel 5. |
| |
Number Audio Mutes |
Number of error recover audio mutes. |
| Line A8 |
|
|
| |
PID 0 Counter |
PID count for control channel 0. |
| |
PID 1 Counter |
PID count for control channel 1. |
| |
PID 2 Counter |
PID count for control channel 2. |
| |
PID 3 Counter |
PID count for control channel 3. |
| |
PID 4 Counter |
PID count for control channel 4. |
| |
PID 5 Counter |
PID count for control channel 5. |
| |
Number Video Mutes |
Number of error recovery video
mutes. |
